Contact Us

  • +86 15988438401
    +86 15988438401
  • Room 508,Building 12,Lefu Zhihuiyuan,No.30 ,Xiangyuan Road,Gongshu District, Hangzhou,Zhejiang,China.
    Room 508,Building 12,Lefu Zhihuiyuan,No.30 ,Xiangyuan Road,Gongshu District, Hangzhou,Zhejiang,China.
  • benny@hzgreeme.com
Constant Temperature and Humidity Machine GMHW-10F

Constant Temperature and Humidity Machine GMHW-10F

Function and features of Constant Temperature and HumidityMachine GMHW-10F

1. Typical models: temperature increasing and decreasing, cooling dehumidification, heating dehumidification, constant temperature dehumidification and humidification.
2. Sealed structure design, with Daikin compressor
3. Electrical heating and Electrode type humidifier equipped, adequate and surpassed heating capacity. Air conditioner has lower humidify capacity, normally need to choose a larger model or install one more equipment
4. Easy to drainage: inclination design of the tray, allowing overall drainage without backup
5. High quality of insulating materials, increase 15% of the insulating effect, low noise, moisture proof
6. Reliable and safe operation.  Every components is strictly tested in our technical department, long lasting service time
7. Heat exchanger has Hydrophilic membrane fin with, increase efficiency by 20%
8. Quiet centrifugal fan, comfort and energy saving

Principleof Constant Temperature and HumidityMachine GMHW-10F

The whole process contains 3 main connected systems: Refrigerant recycling system, Air recycling system and Electrical automatic control system.
  • Refrigerant cycling system: The liquid refrigerant absorbs the heat in the air and starts to evaporate, thus making the relative temperature difference between the refrigerant and the air. When the liquid refrigerant comes into gaseous form, it is inhaled and condensed in compressor. Then the gaseous refrigerant absorbs heat in the condenser (air cool/water cool) into liquid. Through the throttling process of the expansion valve, it finally becomes liquid refrigerant with low temperature and low pressure. That is the recycling system of refrigerant.
  • Air recycling system: The air is sucked up into air outlet by the fan. It is transferred into the room where users needed through evaporator (Cooling and dehumidify), humidifier and electric heater (Heating). Then the transferred air mix with the air within the room comes back to the air outlet. That makes the recycling of air.
  • Electrical automatic control system: This system is made us of voltage and automatic control system separately. Voltage, in simple terms, supply electricity to the compressor, fan, electric heater. Automatic control system can be divided into temperature control, humidity control and malfunction protection.

Application of Constant Temperature and Humidity Dehumidifier

National defense engineering, Civil air defense works,  precision instrument room, Tobacco, Petrochemical industry, Subway station, Aerospace, Purification Project, Laboratory, Computer room, Archives, Food workshops, Pharmaceutical or firm workshops, Special Glass Production, Wood and other occasions needs the control of humidity and temperature.
Properties Model GMHW-10F
Model GMHW-7F
Control scope of Air Temperature
Control scope of Air Humidity %RH 35%--95%
Cooling Load kw 15
Heating Load kw 9
Circulating Air Flow m3/h 3200
Noise dB(A) ≤55
Voltage V/HZ 380V/50HZ
Temperature Control Range 18 to 30°C
Humidity Control Range: 50% to 70%RH
Refrigeration and Heating System Compressor Type Fully enclosed vortex
Surplus Pressure of the Unit PA ≥100pa
Maxmium input Power kw 6.85
Maxmium input current A 12.4
Compressor input Power kw 4.3
Compressor input current A 7.5
Refrigerant R22 3000g
Evaporator Copper tube with aluminum fin
Dehumidifying System Dehumidify Capacity Kg/h 10
Model Water cooling
Dehumidification Power kw 5
Model Air cooling
Total Power KW 15.2
Humidifying System Humdify Capacity Kg/h 4
Model Electrode humidifying
Humidification Power kw 3
Heating System Model PTC
Humidification Power KW 9
Supply System Fan model Low noise central frugal
Fan amount 1
Driving model Motor drive
Power of Motor kw 0.25
Air In / Out Method Front in, Top out
Filter Plate type G4 pre-filter
Control Method Mechanical intelligent control
Dimension of indoor units 800*500*1680
Weight of indoor units 200 kg
Dimension of outdoor units 970*410*1260mm
Weight of outdoor units 128kg
Model and Amount of out door units SW5N*1

Leave a Message