Overview of Desiccant Rotor Dehumidifier GMR10C
This series is our Rotary dehumidifiers, which is mainly applied in storage, cold storage, power station, library, electronic control room and any other facilities which are in need of relative dry air protection.
Dehumidify capacity: 1kg/h
Applied area: 120-200㎡
Dimension: 465x305x665 (mm)
Functions and Features of Desiccant Rotor Dehumidifier GMR10C
-
High-quality sheet metal housing
-
Swedish Proflute silica-gel rotor, washable and efficient; other famous brand electrical components
-
Slim and light body, maximum energy saving
-
International standard interface of all the external air ducts, easy to disassemble and connect
-
SCR equipped in regenerative heat device
-
Overcurrent and overload protection, high-temperature protection, remote alarming model help the long-distance control
-
Delay protection of the regenerative heater when power off
-
Customized remote control is accepted to monitor the humidity
Parameter of Desiccant Rotor Dehumidifier GMR10C
|
Model
|
GMR10C
|
|
Rated Process Air Flow
|
m³/h
|
220
|
|
Regenerated Air Flow
|
m³/h
|
70
|
|
Noise
|
dB
|
≤45
|
|
Dehumidify Capacity
|
kg/h
|
1
|
|
Test Conditions
|
|
T=20℃，RH=60%
|
|
Reactivation Heating Temperature
|
℃
|
120±10
|
|
Maximum Power Rating
|
kW
|
1.5
|
|
Operating Power Rating
|
kW
|
1.2
|
|
Current Rating
|
A
|
7
|
|
Applied Temperature
|
℃
|
-20℃~+60℃
|
|
Dia of Air Inlet
|
mm
|
100
|
|
Dia of Air Outlet
|
mm
|
80
|
|
Voltage
|
V/Hz
|
220V /50Hz
|
|
Body Size
|
mm
|
465*305*665
|
|
Net Weight
|
mm
|
30kg
|
Principle of Desiccant Rotor Dehumidifier GMR10C
Desiccant Rotor dehumidifiers remove the humid the air and provide the relative dry air by a rotating desiccant silica-gel wheel, which is continuously re-dried again. In this series, the most component is the desiccant rotor. It is formed as honeycomb, usually making of silica gel or molecular. When the process air passes into the 3/4 flutes of the wheel, it is absorbed by the desiccant. At the same time, a heated air stream (normally 100~140℃), called the reactivation air, pass through the 1/4 flutes, warms the desiccant by evaporating the moisture within. Thus, the desiccant rotor recovers the dehumidification capability.
+86 15988438401 
benny@hzgreeme.com 
English 
français 
Deutsch 
Español 
italiano 
русский 
العربية 
tiếng việt 
ไทย 
Nederland 
Contact us 
